Last week I showed you how I styled a retro inspired swagged out cocktail bar. Today, I’m sharing how to re-create some of the decorative elements that were used get that look. First, I’m sharing how to create these adorable Ribbon Bow-Tie Straw Toppers.
To start, you will need to following supplies:
Step 1: Measure out your ribbon to 3″ and another at .5″.
Step 3: Once glue has dried, pinch the ribbon closed towards the center to create a pleated look.
Step 4: Wrap the .5″ ribbon around the center of the pleated ribbon and adhere with glue to create a bow. (Tip: a clothespin is helpful during this step to hold the pleated ribbon together as you glue on the center strip of the ribbon.)
Another element that was used for the cocktail station was the ever popular Tissue Fringe Garland. I also used fringed tassels to anchor the ‘cocktails’ banner that was used for the drinks station. You can download the FREE cocktails banner here. I know that there are plenty of tutorials on how to make these and there is no wrong or right way to make them. I’ve come up with several different styles of making them but the way I’m going to show you today, is the easiest for me. The key is no more than 2 sheets of thin tissue paper
Here’s how to make your own tissue fringe garland.
Step 1: You will need at least 2 sheets of tissue paper, a ruler and scissors.
Step 2: Most tissue paper comes folded. You can use the fold line as a guide to cut your paper in half lengthwise.
Step 3: Fold both sheets together width-wise.
Step 4: Use your ruler as a guide to begin cutting paper into strips.
Step 5: Cut paper into strips up to the edge of the ruler.
Step 6 – 8: Cut again centering each cut from the last and repeat until you’ve cut the fringes to the width you desire. For best results each cut should be between .5″-.75″.
Step 9: Unfold tissue gently.
Step 10: Unfold again, gently until you can lie the tissue flat with fringe flat on both sides.
Step 11: Start rolling up the middle of the paper all the way through to the end. You should have something similar to a fringed ‘wand’.
Step 12: Gently roll and twist the center section of the ‘wand.
Step 13: Bend the twisted section in half to form a loop and add hot glue.
Step 14. Seal the end of the loop to close.
You can make as many fringed tassels as you’d like, find a nice sturdy string and thread through the loops and hang!
I hope these ideas help you to create a swagged out space for your next bash!
MG Party Planner, Keisha Sibert – Cupcake Wishes & Birthday Dreams